JK Audio Daptor Three - Manual (Page 3)

10
Inputs:
Female XLR: Balanced, 20k ohms,
-4 dBu nom.
Stereo Line In: Unbalanced, 3.5mm,
20k ohm, -10 dBu nom.
Frequency response: Headset (phone)
300 Hz - 3400 Hz
Headphone mode: A2DP
30 Hz - 17k Hz
Outputs:
Male XLR: Balanced, 200 ohms,
0 dBu max.
Stereo Line Out: Unbalanced, 3.5mm,
200 ohms, -6 dBu max.
Frequency response: Headset (phone)
300 Hz - 3400 Hz
Headphone mode: 30 Hz - 20k Hz
Power:
One 9-volt battery
Size: 4.4” x 2.7” x 1.2”
(11.2 x 6.9 x 3.5 cm)
Weight:
7 ounces (200 grams)
Note: While Daptor Three was designed to be very rugged and
durable, it is not waterproof and care should be taken to keep the
unit dry.
Specifications
3
Features
1. Drawer for 9 V battery.
2. This LED flashes blue when setting up or using a Bluetooth
connection. See page 5 for timing diagrams. The LED will illu-
minate briefly when the unit is first powered on.
3. This Multi-Function Button (MFB) is used to establish a con-
nection with your Bluetooth enabled cell phone, laptop or other
device.
4. This Stereo LED will flash green when the device is in Master
mode and red when it is in Headset mode. See Page 6.
5. Stereo Line In - Connect the stereo output of your audio player
or other equipment to this jack to be sent to the caller.
6. Stereo Line Out - Connect this stereo output to the stereo line
input on your PC, mini recorder or other audio equipment.
7. Balanced XLR Line In - Connect the line level output of your
other audio equipment to this jack to be sent to the caller.
8. Balanced XLR Line Out - Connect this output to the line level
input on your recorder or other audio equipment.
1 2 3 4
5 6
7 8