JK Audio BlueSet - Manual (Page 9)

5
Bluetooth Wireless Technology
Pairing to a Cell Phone
with Bluetooth Wireless
Technology
When you're first connecting to a
new device, you should be in an
environment with no other Bluetooth
wireless technology enabled devices
within range that might also be in
Pairing Mode.
1. Set the
to the position.
2. From the powered-off state*, hold
the on the
BlueSet for at least 6 seconds.
Upon release, the blue LED should
flash rapidly as the BlueSet enters
Pairing Mode.
3. On your phone, search for
Bluetooth wireless technology
devices. If this is the first time you
have paired with this device, select
the option to add an audio device.
When the cell phone has found
the new device, select from the list
the device ID of 'JKBSETgpxxxx'
where: g = XLR gender;
p = XLR pin count;
xxxx = the last four digits of
the serial number.
4. Enter the pin number as '0000'
if requested
5. When bonding is complete, the blue
LED will flash at a rate of 2 seconds
off, 1 second on (2 secs off, 4 secs
on for HD Voice). Once BlueSet
has been added to your cell phone,
subsequent connections can be
made more quickly from Idle Mode
by holding the <Connect Button>
for only 2 seconds before releasing.
* Holding the for 5
seconds while in the powered-on state
will power off the BlueSet.