JK Audio BlueSet - Manual (Page 10)

6
BlueSet Wireless Headset Interface
Bluetooth Wireless Technology
Pairing to a Headset
with Bluetooth Wireless
Technology
When you're first connecting to a
new device, you should be in an
environment with no other Bluetooth
wireless technology enabled devices
within range that might also be in
Pairing Mode.
1. Set the
to the position.
2. Following manufacturer’s
instructions, set your headset to
Pairing Mode.
3. From the powered-off state, hold
the on the
BlueSet for at least 6 seconds. After
you release it, the blue LED should
flash rapidly if the BlueSet is in
Pairing Mode.
4. When bonding is complete, the blue
LED will flash at a rate of 2 seconds
off, 1 second on (2 secs off, 4 secs
on for HD Voice). Subsequent
connections can be made more
quickly from Idle Mode by holding
the for only 2
seconds before releasing.
Note: Connecting via Bluetooth
wireless technology varies with different
cell phones.
Note: If left unused in Idle or Pairing
Mode, the BlueSet will automatically
disconnect the Bluetooth connection in
two minutes and power off.