0 user selectable parameters, 1 setting the year, 2 setting day and month – HF scientific Micro100 Laboratory Turbidimeter User Manual

Page 14: 3 setting the time

Micro 100 (5/10)

Page

Rev. 3.3

6.0

User Selectable Parameters

The MICRO 100 provides you the ability to customize your instrument according to your needs at any time
during normal operation. This section describes how you can customize your instrument.

NOTE: You cannot access any of the user selectable parameters during calibration.

Enter the customer selectable parameters section of the MICRO 100 by simultaneously pressing the

key while holding down the

key when the instrument is operating in the normal automatic

mode. The "Year" block will be highlighted and the year will be displayed.

NOTE: To skip the selection of any parameter simply press the enter key

to continue on to

the next section.

6.1

Setting the Year

With the "Year" block highlighted and the year displayed, change the displayed year using the

keys. When you have selected the proper year press the enter

key to accept the year.

6.2

Setting the Day and Month

After pressing the

key, the "Day.Month" block will be displayed and you will see two numbers

on the lower row of the display. The number flashing corresponds to the month. Select the correct

month by pressing the

key to change the displayed month. When you have selected the

proper month, press the

key. After pressing the

key, the "Day.Month" block will still be

displayed and the second number on the lower row of the display will be flashing: this number

corresponds to the day of the month. Select the correct day by pressing the

keys to

change the displayed day. When you have selected the proper day, press the

key.

NOTE: The MICRO 100 is year 2000 (Y2K) compliant and automatically adjusts for leap years.

6.3

Setting the Time

After pressing the

key, the "Time" block will be displayed and you will see the time displayed on

the lower row of the display in 24 hour format. The number flashing corresponds to the hour. Select the
correct hour by pressing the or key to change the displayed hour. When you have selected the proper

hour, press the

key. After pressing the

key, the" Time" block will still be displayed and the

second number on the lower row of the display will be flashing: this number corresponds to minutes.

Select the correct minutes level by pressing the

key to change the displayed minutes.

When you have selected the proper minutes level, press the

key.