2 on-demand dispensing – Brady 3481 User Manual
Page 33
23
3.5.2
On-Demand Dispensing
When equipped with the Peel and Present option, labels are dispensed from the
printer one at a time, separated automatically from the liner for immediate
application.
Œ
With the Peel and Present
Mechanism installed on the
printer, pull outward on the
Latch and allow the Roller
Bracket to swing forward.
•
With media loaded as
described in Section 3.1, press
the FEED key to advance
approximately 20 inches (51
cm) of media. Remove all of
the labels from the backing
material.
Ž
Route the backing material through the Roller Bracket as shown (the
backing should go under the top black roller, then out).
•
Raise the Roller Bracket up to its latched position.