Installing glyph wildfire cdr hardware – Glyph Firewire CDR User Manual

Page 6

Text mode
Original mode

Installing Glyph WildFire CDR Hardware

Step 1 - Position the Drive

Find a level, solid surface on which to place the unit.
Here’s one on Larry’s desk.

Step 2 - Connect Power Cable (Power Off)

Make sure that the power is off on all of your computer
equipment and the WildFire CDR. Connect the power cable to the
back of the WildFire CDR drive. Plug the three prong power plug
into an appropriate power receptacle, preferably with surge and
spike protection.

Step 3 - Connect FireWire Cable

Plug one end of the firewire cable into your computer’s firewire
port, and the other into the back of the WildFire CDR. The firewire
cables have an obvious shape and should plug in easily (like any
computer connection, don’t ever force the plug).