GBC 44DT - Manual (Page 23)

Page 6-7
Operating Instructions
44DT
Fig. 6-9. Configuration for Thermal Film.
Fig. 6-10. Configuration for AccuShield Film
C
ONFIGURATION FOR
PSA F
ILMS
PSA films are loaded with the top supply shaft
assembly in the rear position as shown in Fig. 6-12.
Notice that the supply shaft is mounted on the rear
of the machine.
The brake and support must be positioned in the
rear position for PSA films. To move the supply shaft,
see To move the supply shaft in the Configuration for
Thermal and Accushield Films section.
Fig. 6-11. Supply Shaft and Brake Assemblies Mounted
on the Rear Position.
Fig. 6-12. Configuration for Poly-in PSA Film.
Release liner
Take-up
PSA Film
PSA mounting film or kraft paper