GBC EBA 721-05 LT - Manual (Page 21)

- 21 -
EBA
"Service"
Malfunction:
Machine is switched on but cut cannot be made.
Cause:
Safety clutch is activated.
Remedy:
Contact your dealer.
Malfunction:
Does not cut through the last sheet.
Remedy:
Adjust replace or turn the cutting stick (see
Cutting stick).
Malfunction:
Poor cutting quality or blade stays in the paper
stack.
Remedy:
Change the blade or adjust as necessary.
Malfunction:
No clamp pressure
Cause:
Hydraulic oil needs refilling
Remedy:
Contact your dealer.
If you have further questions please contact your
dealer or directly on the internet www.eba.de
© "service" [email protected]
Subject to alteration wihout notice