Usp 13 universal speed punch, Maintenance instructions – GBC Usp13 User Manual

Page 11

It is recommended that the machine be lubricated

once every two weeks. Lubricate by putting a few drops

of machine oil in the lubricating holes, which are marked

with red paint.

All gears in the main body of the machine run in pans,

which are partially filled with a special gear lubricating

grease. This grease should be replenished occasionally,

as required, with Lubriplate 630AA, obtainable at any

Lubriplate dealer.

USP 13 Universal Speed Punch

MAINTENANCE INSTRUCTIONS

All punching tools should be lubricated daily.

AT THE BEGINNING OF EACH SHIFT, IT IS SUG-

GESTED TO GREASE THE PUNCHING PINS OF

EACH TOOL BY APPLYING GEAR GREASE WITH A

SMALL BRUSH. “PAINT” THE GREASE ON THE

FRONT AND THE REAR OF THE TOOL ACROSS ALL

THE PUNCHING PINS.

IT IS ESSENTIAL THAT ONLY

SHARP PUNCHING TOOLS

BE OPERATED IN A

PUNCHING MACHINE

IMPORTANT!