E-flite UMX Radian BNF - Manual (Page 10)

10 EN
Motor Service
CAUTION: DO NOT handle propeller parts
while the fl ight battery is connected. Personal
injury could result.
IMPORTANT: Removing tape or decals can
remove paint from the fuselage.
NOTICE: DO NOT remove the gearbox from
the aircraft. Damage to the aircraft will result.
• Hold the prop shaft using needle-nose pliers
or hemostats to remove the propeller and
prop nut.
Assembly
Assemble in reverse order.
• Correctly align the prop shaft gear with the
pinion gear on the motor.
• Connect the motor to the ESC/receiver so
that the powered motor turns the propeller
counterclockwise (facing the front of the
model).
• Make sure the propeller size numbers
• (130x70) face away from the motor (see
illustration).
• Attach the spinner to the propeller using foam-
compatible CA (Cyanoacrylate adhesive).
• Assemble the fuselage using clear tape.
In
st
al
l
Rem
ove