E-flite P-38/2 Motors/2 ESC Combo - Manual (Page 3)

5. Re-install the donut washer against the bearing.
6. Re-install the shaft collar back against the washer and bearing.
7. Retighten all setscrews making sure you line up with the flat spot on the shaft.
Replacement shafts are available separately. Order EFLM1401 for a Park 450 BL Outrunner shaft.
Safety Precautions:
This is a sophisticated hobby product and not a toy. It must be operated with caution and common
sense and requires some basic mechanical ability. Failure to operate this product in a safe and
responsible manner could result in injury or damage to the product or other property. This product is
not intended for use by children without direct adult supervision. The Outrunner motor case is
a rotating part so use extreme caution. Please read the warning information included with your
propellers for safety information related to the operation of motors with propellers. Failure to comply
with these warnings and/or improper use of propellers may result in serious injury.
Limited Warranty Period
Horizon Hobby, Inc. guarantees this product to be free from defects in both material and workmanship
for a period of 1 year from the date of purchase.
Limited Warranty & Limits of Liability
Pursuant to this Limited Warranty, Horizon Hobby, Inc. will, at its option, (i) repair or (ii) replace, any
product determined by Horizon Hobby, Inc. to be defective. In the event of a defect, these are your
exclusive remedies.
This warranty does not cover cosmetic damage or damage due to acts of God, accident,
misuse, abuse, negligence, commercial use, or modification of, or to any part of the Product.
This warranty does not cover damage due to improper installation, operation, maintenance, or
attempted repair by anyone other than an authorized Horizon Hobby, Inc. service center. This
warranty is limited to the original purchaser and is not transferable. In no case shall Horizon
Hobby’s liability exceed the original cost of the purchased product and will not cover
consequential, incidental or collateral damage. Horizon Hobby, Inc. reserves the right to
inspect any and all equipment involved in a warranty claim. Repair or replacement decisions
are at the sole discretion of Horizon Hobby, Inc. Further, Horizon Hobby reserves the right to
change or modify this warranty without notice.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER. HORIZON HOBBY, INC. SHALL NOT BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES.
As Horizon Hobby, Inc. has no control over use, setup, final assembly, modification or misuse,
no liability shall be assumed nor accepted for any resulting damage or injury. By the act of
use, setup or assembly, the user accepts all resulting liability.
If you as the purchaser or user are not prepared to accept the liability associated with the use of this
product, you are advised to return this product immediately in new and unused condition to the place
of purchase.
Safety Precautions
This is a sophisticated hobby product and not a toy. It must be operated with caution and common
sense and requires some basic mechanical ability. Failure to operate this product in a safe and
responsible manner could result in injury or damage to the product or other property. This product is
not intended for use by children without direct adult supervision.
The product manual contains instructions for safety, operation and maintenance. It is essential to
read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in
order to operate correctly and avoid damage or injury.
Questions, Assistance, and Repairs
Your local hobby store and/or place of purchase cannot provide warranty support or repair. Once
assembly, setup or use of the product has been started, you must contact Horizon Hobby, Inc.
directly. This will enable Horizon to better answer your questions and service you in the event that you
may need any assistance.
Questions or Assistance
For questions or assistance, please direct your email to [email protected], or call
877.504.0233 toll free to speak to a service technician.