E-flite A6M5 Zero 300 BNF Basic - Manual (Page 10)

10
EN
Post Flight Checklist
9
1. Disconnect fl ight battery from ESC
(Required for safety and battery life).
2. Power off transmitter.
3. Remove fl ight battery from aircraft.
4. Recharge fl ight battery.
9
5. Store fl ight battery apart from
aircraft and monitor the battery
charge.
6. Make note of fl ight conditions and
fl ight plan results, planning for
future fl ights.
Using the Display Stand
Tip: Glue is not required for the assembly of the display, but may be used if the display will not be
disassembled.
CAUTION: Always remove the battery before displaying the model.
NOTICE: Always remove the model from the display before adjusting the display. Failure to do so may result
in damage to the model or the display.