BenQ PB2250 - Manual (Page 37)

Maintenance 33
- -
The Power indicator light is flashing during powering up.
- -
The projector is under normal operation.
Lamp events
- -
It is warning you that lamp usage has exceeded 2000 / 3000
(Economic mode) hours. Replace the projection lamp with a
new one immediately.
- -
The lamp is not properly attached or the lamp is damaged.
Please contact your dealer for assistance.
Thermal events
-
The projector has shutdown automatically. If you try to re-start
the projector, it will shutdown again. Please contact your dealer
for assistance.
The projector has shutdown automatically. If you try to re-start
the projector, it will shutdown again. Please contact your dealer
for assistance.
The projector has shutdown automatically. If you try to re-start
the projector, it will shutdown again. Please contact your dealer
for assistance.
-
The projector has shutdown automatically. If you try to re-start
the projector, it will shutdown again. Please contact your dealer
for assistance.
The projector has shutdown automatically. If you try to re-start
the projector, it will shutdown again. Please contact your dealer
for assistance.
The projector has shutdown automatically. If you try to re-start
the projector, it will shutdown again. Please contact your dealer
for assistance.
- -
The projector has shutdown automatically. If you try to re-start
the projector, it will shutdown again. Please contact your dealer
for assistance.
-
The projector has shutdown automatically. If you try to re-start
the projector, it will shutdown again. Please contact your dealer
for assistance.
-
The projector has shutdown automatically. If you try to re-start
the projector, it will shutdown again. Please contact your dealer
for assistance.
G
G
R
R
R R
R R
G
R R G
G
R
G
R
G
G
R G
R
R
G
R G