Radio operation – Blaupunkt Casablanca CD50 User Manual

Page 11

Tuning into radio stations

You can tune into radio stations in a
number of different ways.

Automatic seek tuning

➮

Press or

The radio will tune into the next availa-
ble station within reception range.

Manual station selection

You can also tune into radio stations
manually.

➮

Press or

Note:
You cannot use manual tuning unless
the RDS functions are deactivated.

Paging through the broadcasting
network (for FM only)

If a radio broadcasting network has
more than one station, you can page
through the “station network”.

➮

Press or

to tune into the

next station in the network.

Note:
To take advantage of this function, you
must have activated the RDS functions.

It is only possible to tune into those sta-
tions which have been received once
before already. To do this, use the SCAN
or TravelStore function.

Adjusting seek tuning sensitivity

It is possible to adjust the sensitivity of
the seek tuning function to tune the ra-
dio into stations with strong reception
signals only, or to those with weaker
reception signals as well.

➮

Press MENU

➮

Press

repeatedly until

“SENS” appears in the display.

➮

Press

The currently selected setting will ap-
pear in the display. “SENS HI6” indicates
the highest level of sensitivity, “SENS
LO1” the lowest. If you select “SENS
LO”, “lo” will light up in the display.

➮

Press

to select the desired

sensitivity.

➮

Once you have made your selec-
tion, press MENU

or OK

;

Storing radio stations

Storing radio stations manually

➮

Select the desired memory bank
FM1, FM2, FMT or either MW or
LW.

➮

Tune the radio into the desired sta-
tion.

➮

Press and hold down one of the
station preset buttons 1 to 6

which you want to store the radio
station for longer than two seconds.

RADIO OPERATION