Warning – Britax Boulevard User Manual

Page 21

Rotate seat into forward-facing position.

Verify LATCH strap is not twisted, then attach

remaining LATCH connector to adjacent LATCH

anchor (fig. D).

A positive click confirms attachment.

Kneel on child restraint to push it into vehicle seat

while pulling each LATCH strap tight (fig. E).

Verify all connections and restraint are secure. The

restraint is secure when it cannot be moved front-

to-back or side-to-side more than 1” (2.5 cm.) at

belt path. If restraint is not secure, repeat procedure

or use an alternate seating location.

Remove slack from Versa-Tether and store excess

webbing in tether pouch.

Removal

Disconnect Versa-Tether from tether anchor. While

pushing restraint firmly into vehicle seat, press red

release buttons on LATCH connectors to release.

When not in use, always store LATCH connectors

and Versa-Tether.

5�

6�

•

7�

8�

9�

Installation: Forward Facing

WARNING!

Use vehicle belt (not LATCH connectors) for

installations with children weighing more than 48 pounds (21

kg.). Refer to your vehicle’s owner’s manual or contact vehicle

manufacturer for maximum weight rating for their LATCH anchors.

Unless specified otherwise by vehicle manufacturer, assume a 48-pound

child is vehicle LATCH anchor limit.