BT Diverse 6110 User Manual
Page 62

62
BT Diverse 6110 ~ Issue 2 ~ Edition 1 ~ 06.04.05 ~ 6794
Help
No display appears
■
The handset may be switched off.
■
Press and release the
button to switch the handset on.
■
The batteries may be flat, dead or incorrectly inserted. Recharge, replace or renew the
batteries.
No dial tone
■
Make sure your handset is registered to the base and within range of the base.
■
Is the telephone cord of the base plugged into the phone socket?
■
Check that the base station is connected to the mains power and switched on.
You cannot link up with the base station
■
Does the display show Out of Range? If so, you are out of range of the base the
handset is registered to or power is off at the base.
■
Batteries could be low or flat.
■
If using more than one base station, check that you have the correct base selected.
Handset does not ring
■
The ringer volume may be switched off (if it is there will be a
icon on the display).
Press and hold
to switch it off and on. To adjust the ringer volume on the handset,
see page 48.