Vizio M652i-B2 - User Manual - Manual (Page 11)

1
5
BACK OF TV
4. Align the Stand with the back of the TV.
M492i-B2 & M552i-B2: Use a Phillips screwdriver to insert and
tighten the four (4) included M6 x 18mm Phillips screws into the
holes on the back of the TV.
M652i-B2: Use a Phillips screwdriver to insert and tighten the
four (4) included M6 x 16mm Phillips screws into the holes on
the back of the TV.
5. When you are finished, place the TV on a stable, level surface.
2. Align the neck piece with the base.
3. Use a Phillips screwdriver to insert and tighten the four (4)
included M5 x 14mm Phillips screws into the holes on the
bottom of the Base.