Vizio E400i-B2 - Quickstart Guide - Manual (Page 18)

HELP TOPICS
How do I return to the
Setup App?
There is a picture, but
there is no sound.
The TV displays
“No Signal.”
There are black/
gray bars on the top/
bottom/sides of the
screen.
There is no power.
•
The on-screen menu has guided setup. Press MENU > Guided Setup. Select the type
of setup you need and press OK. The Setup App begins.
•
To reset the TV to factory defaults, press MENU > System > Reset & Admin > Reset TV
to Factory Defaults. If you set a Parental Control Passcode, enter it now. Select Reset.
Remember that all of your settings will be lost.
•
Press the VOLUME UP button on the remote.
•
Press the MUTE button on the remote to ensure that mute is off.
•
Press MENU, then select Audio. Be sure TV Speakers is set to On.
•
Be sure your connected devices are turned on.
•
Press the INPUT button on the remote and select the input to which your device is
connected (TV, HDMI-1, COMP, etc).
•
Note that some television channels add black bars to the picture.
•
Set the TV image mode so that the picture fills the screen. Press the WIDE button on
the remote until the screen is filled, and then press OK.
•
Adjust the video settings of your external device.
•
Be sure the power cord is securely connected to the AC socket on the TV and to a
working electrical outlet.
•
Press the POWER button on the remote or on the side of the TV.
•
If the above steps do not work, try plugging the power cord into a different outlet.