Dolgin Engineering VD-14 vDOUBLER Manual User Manual
Page 2
Dolgin Engineering 1019 Massachusetts Ave. Lexington, MA 02420 • (781) 863-1813 • www.dolgin.net
1
Introduction
The vDOUBLER is electrically compatible with all common 7.2V Li-Ion camera batteries. The modular
design allows for different battery models to be used when the appropriate adapter plate is fitted. With the
appropriate power cord, the vDOUBLER can power a monitor, camera or any other device using 12V-16V
DC power.
Batteries
The VD-14 adapter accepts Sony L/M (VX2xx or similar), Panasonic DVX100/HVX200, Canon BPxx
(XL/GL), and JVC BNVxx (GY-HDxx) style batteries. The adapter must be configured with the appropriate
plate to match the battery style. We recommend using batteries of similar size, make, etc.
Operation
Mount 2 fully charged batteries on the VD-14 adapter. The Green LEDs will illuminate. Connect your device
to the DC output jack, using appropriate cable.
Status LEDs
1. Green ON
Batteries are fully charged
2. Green blinking
Batteries are at approximately 40% charge level
3. Red blinking
Batteries are at approximately 20% charge level
3. Red ON
Batteries are discharged *
* To extend batteries service life avoid running them down to RED level