Black & Decker Linea Pro KS650K - Manual (Page 16)

16
ENGLISH
Sawing metal
Be aware that sawing metal takes much more time than
sawing wood.
Use a saw blade suitable for sawing metal.
When cutting thin sheet metal, clamp a piece of scrap
wood to the back surface of the workpiece and cut
through this sandwich.
Spread a film of oil along the intended line of cut.
MAINTENANCE
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance, switch off
and unplug the tool.
Regularly clean the ventilation slots in your tool using a
soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste. Should
you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the retailer
when you purchase a new product.
SERVICE INFORMATION
Black & Decker offers a full network of company-owned and
authorized service locations. All Black & Decker Service Centers
are staffed with trained personnel to provide customers with
efficient and reliable power tool service. Whether you need
technical advice, repair, or genuine factory replacement parts,
contact the Black & Decker location nearest you, or visit us at
www.BlackandDecker-la.com
SPECIFICATIONS
Voltage
AR, B2C, B2 220V
B3 120V
BR 127V
Rated input 600 W
No-load speed min -1 800 - 3000
Max. depth of cut
Wood 85 mm
Steel 5 mm
Aluminium 15 mm
Weight 2.36 kg
KS650K