DJI F550 v1.9 - Manual (Page 6)

©2012 DJI Innovations. All Rights Reserved.
6
Assembly
1
2
3
4
5
6
S M2 5x6
crew
.
Top board
Bottom Board
S M3x8
crew
Step 1
Install bottom board
Step 2
Install autopilot system
Step 3
Install motors, ESCs
Step 4
Install top board
Step 5
Install propellers
 Install screws by appropriate force
to prevent breaking threads.
 U s e a d e q u a t e s c r e w g l u e f o r
installing screws.
 Please wire neatly. Make sure wires will
not be cut by frame boards and propellers.
 Smooth out the boards edge if necessary.
 Please install propellers after autopilot system configuration procedure.
 Make sure the rotation direction of propellers are the same as the figure
shows.
 When mounting the propellers, do not use any thread locker, just tighten
the nuts to the end manually then use the wrench to tighten it about 50°.
In up figure, arms ①② front of craft, arms ④⑤ are back of craft. See from top, motors on arms ①③⑤ rotate counter-clock wise, use propellers 1038; motors on arms
②④⑥ rotate clock wise, use propellers 1038R.