Constellation Audio Argo - Manual (Page 15)

15
Input selector (or home) screen
This screen appears when the power is on and the unit is
warmed up. Touching any input button onscreen will switch
to that input. The setup screen can be accessed from this
screen using the multifunction button below the display.
Input screen
When you select an input, this screen will appear. It
provides a large volume display as well as the display for
the balance control. The balance control functions only
when this screen is shown. Pushing the multifunction
button under the Setup label enters the input setep screen.
Note that when the input screen is displayed, the output of
the Argo can be set for speakers or headphones. The fourth
indicator on the lower part of the touchscreen (identified by
the red arrow in the screen at right) shows whether
speakers or headphones are selected.