ClearCube CD9822 Mounting Bracket - Manual (Page 3)

Page 3 of 6 P/N G0200166 Rev A, 1.0.05.14.2014
ClearCube Technology, Inc. 3700 W Parmer Lane Austin, TX 78727 (512) 652-3500 www.clearcube.com
Installation
This section shows how to install the mounting bracket under a desk (or other piece of furniture) or using a VESA mount.
Under desk
mounting The steps below show how to mount a bracket under a desk or other piece of furniture and how to
attach a zero client to the bracket.
Mounting the bracket
Step Action
1 When choosing a mounting location, be sure to orient the bracket as shown in the
figure below. Use the bracket as a template to mark the location of the four
mounting holes.
2
Use a
32
3 -inch bit to drill pilot holes for the wood screws in the locations you
marked (be sure that the depth of the pilot holes is appropriate for the thickness of
the furniture – do not drill through the top of the desk).
3 Align the bracket with the pilot holes. Use the included wood screws to affix the
bracket to the desk.
Now attach a zero client to the bracket as shown below.
Continued on next page