Clearaudio OVATION - Manual (Page 6)

Ovation
User manual
Page 6  Clearaudio electronic GmbH 2014
2.1
Place the pre-mounted chassis on your hifi-rack or another suitable surface.
2.2
To avoid hum noises it can be necessary to ground the bearing. For that please plug in the provided
ground cable into the hole of the screw from the bearing at the bottom side of the turntable and
connect the other end with your amplifier.
2.3
Please remove the protective seal from the bearing shaft and place two drops of the synthetic
bearing oil on the ceramic bearing shaft. Slip the bearing top onto the bearing shaft of the
turntable.
Pic. 2: Ovation chassis
Pic. 4: Bearing oil
Pic. 3: Grounding the bearing of the Ovation