7| move type (time-lapse only), 8| using cinemoco, Select record mode – Cinetics CineMoco v2.0 DOLLY User Manual
Page 8: Select setup style, Select move style (time-lapse only ), Set parameters 5. run program
7| Move Type (Time-lapse only)
The move style allows the user to select how the motor will run in a time-lapse. The move style can have a
significant impact on time-lapses due to its effect on motion blur.
Shoot-move-shoot – The SMS style will cause the motor to stop while taking a shot, then move before
proceeding to take the next shot. This stuttering minimizes the amount of motion blur in a time-lapse.
Continuous – The continuous style will make the motor move non-stop for the entire time-lapse. This will
maximize the amount of motion blur in a time-lapse.
8| Using CineMoco
Before using CineMoco, the motor type in the motor menu must be set to the appropriate product for
calibration purposes. After setting the motor type, using CineMoco is a simple 4-step process for video and 5-
step process for time-lapse.
1. Select record mode
Video
Timelapse
2. Select setup style
Keyframes
Run
3. Select move style (time-lapse only)
Shoot-Move-Shoot
Continuous
4. Set parameters
5. Run program