Cinetics CineMoco v2.0 DOLLY - Manual (Page 6)

Motor (MTR)
Motor Type – Sets the motor type for calibration
purposes (Pan/Tilt, Slider, S60, M60)
Motor Delay – Sets the motor delay to avoid post-
movement vibrations
Motor Sleep – When enabled, the motor will not be
powered when not in use to conserve power. When
disabled, the motor will constantly power to
maintain its position
Speed – Sets the stepping size of the motor.
Increasing the speed allows for faster motor
movement at the cost of angular resolution
Camera (CAM)
Camera Type – Sets the camera type
Fire Test Shot – Test fires the camera
Camera Delay – Sets the camera delay to ensure
that the camera has enough time to finish an
exposure before the motor begins to move
High Dynamic Range (HDR) – When enabled,
multiple photographs at different exposure values
are taken to achieve more detail across lighting
ranges (See section 9)
Bulb Ramping – When enabled, the exposure will
change over the length of a time-lapse to account
for changes in lighting conditions (See section 9)