Calculated Industries 6020 v3.2 - Manual (Page 14)

12 – Scale Master
®
Classic
Finding Area and Volume
Finding Area
1) Roll the first side and press [M1+] . A small
“
m
” will appear in the scale box display and
the main display will be cleared.
2) Roll the second side and press [M2x] . The
main display will be cleared.
3) Press [RCL] [M2x] . This displays the linear
value stored in this register. The second
press of [M2x] will calculate and display the
area, which is the value stored in [M1+]
multiplied by the value stored in [M2x] .
Finding Volume
1) Roll the first side and press [M1+] .
2) Roll the second side and press [M2x] .
3) Set a Height value (see “Setting a Height”).
4) Press [RCL] [M2x] . This displays the linear
value stored in this register. Press [M2x] a
second time to calculate and display the
area. Press the [M2x] key again to find
volume. Press [M2x] a fourth time to
display the stored height value.
a
ppendix
Error/Auto-Range Function
Error Message – Press [RESET] to clear.
Auto Range Function – When rolling or calculating
large numbers, your answer will be displayed in
the next largest measurement unit (ex: 10,000 M
will display instead of 10,000,000 MM ).