Calculated Industries QFCCL - Manual (Page 12)

P
OCKET
R
EFERENCE
G
UIDE
— 8
ƒ
Enters the finished Border Width
(4-sided border). This value then
calculates, upon repeated presses,
the following:
Press Result
1 Border Yardage
2 Number of Strips
(to cut for the Border)
3 Border Strip Cut Width
Note: Border values are based on the Corner
(Miter vs Straight) Preference Setting (default:
Mitered Corners). See Preference Settings for
details.
d
Enters the finished Drop Width
(3-sided drop). This value then
calculates, upon repeated presses,
the following:
Press Result
1 Drop Yardage
2 Number of Strips
(to cut for the Border)
3 Drop Strip Cut Width
Note: Drop values are based on the Corner
(Miter vs. Straight) Preference Setting (default:
Mitered Corners). See Preference Settings for
details.