Calculated Industries 9126 - Manual (Page 6)

[Mode] — Auto–Entry Mode
Toggles the entry method as follows:
1) Decimal Entry
2) Auto–Entry H:M:S (or H:M)
3) Auto–Entry 24–hour
[Beg] — Beginning Point
Enters/calculates the starting point.
Used with
[End] and/or [Dur ].
[End] — End Point
Enters/calculates the end point.
Used with
[Beg] and/or [Dur] .
[Dur] — Duration
Enters/calculates the duration. Used
with
[Beg] and/or [End] .
[Rate] — Rate Function
Allows you to multiply a time value
by a number (or rate) to get an out-
put that is a decimal number.
Timer Function Keys
[Timer] — Stopwatch/Timer
Used to access the timer or stop
watch functions.
[S/Lap] — Split/Lap Function
Pauses the timer display, without stop-
ping the timer. If the
S/LP preference
is set to the “ Split ” option, the total time
6 – Time Master ™ II