Calculated Industries 3420 Pocket Reference Guide - Manual (Page 12)

P OCKET R EFERENCE G UIDE — 11
Setting Decimal Places
You can use the s key to select the
number of decimal places displayed.
(Values are rounded using 5/4 rounding.)
You may do this before or after finding an
answer. Press
s followed by the num-
ber of decimal places you wish to display:
s 4 0.0000
s 3 0.000
s 2 0.00 (Default)
s 1 0.0
s 0 0.
s • Floating Decimal
Note: To return to the standard two decimal
place setting, press
s 2 .
You may also permanently set the number
of decimal places via the Preference
Mode. See page 8.
3420PRG-E-A 7/2/04 9:07 AM Page 11