Calculated Industries 4095-A Pocket Reference Guide - Manual (Page 11)


Defines the Pipe Material. (Steel,
Stainless Steel, Brass, Aluminum,
Cast Iron, PVC or Copper).

Enters the nominal Pipe Size and
provides data pertaining to the
entered size.

 Defines the Pipe Type based on
Pipe Material.

 Calculates pipe Cutback after Bend
Angle and Offset are entered.

 Calculates Rolling Offset pipe length.

 (flow) Enter or calculate volumetric
Flow Rate through a pipe.

 (velocity) Enter or calculate
Velocity and convert between feet
per second, feet per minute, and
meters per second.

 (Pressure) Enter Pressure value.
Calculate Pressure loss. Convert
between units of pressure.

 (force) Enter or calculate Force
and convert between lbf, newton.

 (Area) Enter for pipe area for use
in Flow, Velocity, Pressure, and
P
ocket
R
efeRence
G
uide
— 13
4095 Inside_Corrected.indd 11 4/27/2009 8:42:57 AM