Calculated Industries 4019 - Manual (Page 31)

P
OCKET
R
EFERENCE
G
UIDE
— 27
Default Settings
After a Clear All (
C x), your calculator
will return to the following settings:
STORED VALUE DEFAULT VALUE
Block Area 128.
SQ INCH
Block Length 16
INCH
Weight per Volume 1.5
Ton Per CU YD
Board On-center 5-11/16
INCH
Post On-center 8
FEET
0
INCH
Studs On-center 16
INCH
Custom Tile Size 24
SQ INCH
Tile Grout Width 0
INCH
Paint Coverage Area 350.
SQ FEET
Unit Cost $0. 00
If you replace your batteries or perform a
Full Reset* (press
O, hold down x, and
press
o), your calculator will return to
the following settings (in addition to those
listed above):
PREFERENCE SETTINGS DEFAULT VALUE
Fractional Resolution 1/16
Area Display Standard
Volume Display Standard
Meter Linear Display 0.000
Fractional Mode Standard
*Pressing the Reset hole located above the
o
key will also perform a Full Reset.
Auto-Shut Off
Your calculator will shut itself off after
about 8-12 minutes of non-use.