Calculated Industries 4019 - Manual (Page 10)

P
OCKET
R
EFERENCE
G
UIDE
— 6
S
Studs — Calculates
number of studs, based
on an entered linear
distance and a stored
On-center Spacing.
Note: Automatically adds one stud to the calculated
answer to account for one on the end.
s S
On-center for Studs —
Stores On-center spacing
for studs in Inches. To
recall this setting, press
v S. Default is 16”.
F
Flooring — Calculates the
required length for 12’, 13’,
15’ or 6’ wide rolls, based on
an entered area. Calculates
the coverage area, in
Square yards, for each roll
width, based on the entered
length.
C F
Sheets — Calculates the
number of 4’ x 8’, 4’ x 9’,
4’ x 10’ and 4’ x 12’ sheets,
based on entered linear
distance or area.
c
Custom Tile — Calculates
number of tiles needed
based on an entered area
and a stored Tile Size. This
is used separately from the
regular Tile Key (
T).
Note: Calculation does not account for grout width for
custom tiles, so you will need to adjust for this.