Calculated Industries 4320 - Manual (Page 9)

P OCKET R EFERENCE G UIDE — 8
Ç d Slope — Used to enter
Slope as a ratio of Run per
Unit Rise (e.g., 4:1), or in
Decimal Degrees (e.g.,
10°). Also calculates Slope
using entered value for
Width and Depth or Percent
Grade.
v Volume Key — Computes
the Volume (Length x Width
x Depth) in Cubic Yards
based on entered Length,
Width and Height values. A
second press will display
the area (in Square Feet)
based on entered Length
and Width. Successive
presses will toggle the dis-
play between the calculated
Area and Volume.
Ç v Area — Computes the area
in Square Feet based on
entered Length and Width.
Excavation/Volume Keys
F Used to enter or calculate
the cut or fill amount. Based
on entries of proposed and
existing benchmarks. A fill
is displayed as a positive
value; a cut as a negative
value.
4320PRG-E-A 6/16/04 7:53 AM Page 8