Calculated Industries 4225-B - Manual (Page 8)

P
OCKET
R
EFERENCE
G
UIDE
— 5
Ç
R
Spacing — Stores rebar
on-center spacing. Default
is 18”.
L Loads Key — Calculates
number of loads for a given
Volume or Length, Width,
and Height (Depth) values
and stored load size.
T L Load Size — Stores load
size. Load size must be
entered as a cubic value
(e.g.,
8 y y y
T L
). The default
size is 8 cubic Yards.
Ç 5 Bags — Calculates number
of concrete bags for a given
Volume and stored bag size.
T 5 Bag Size — Stores bag
size (Volume per bag of
concrete). Bag size must
be entered as a cubic value
(e.g.,
• 6 7 f f
f T 5 ). Default is
0.666667 cubic Feet per
bag, based on a standard
80 pound bag.
B Blocks/Bricks —
Calculates the number of
concrete blocks required to
fill a given Area. This key
can also be used for calcu-
lating the number of “face”
or “paver” bricks by storing
a brick size (see Block
Size).