brite-View LinkE BV-210C User Manual - Manual (Page 13)

12
6. S
PECIFICATIONS
Items Description
Powerline Ethernet Bridge Powerline Ethernet Switch
PHY Rate 200Mbps
Effect Data Rate TCP: Up to 90 Mbps
UDP: Up to 91 Mbps
TCP: Up to 91 Mbps
UDP: Up to 92 Mbps
Frequency Band 2~28 MHz (With Mask)
Access Methods CSMA/CA channel-access schemes
Qos Four-level priority based contention access, and multi segment bursting
8-level VLAN priority field, TOS field
QoS Classification by destination MAC address and IP Port
Modulation OFDM (QAM 8/16/64/256/1024, QPSK, BPSK, ROBO)
10/100 RJ-45 port 1 port 4 ports
Transmission
Distance
AC Wire : 100 meters
LAN Standards IEEE 802.3, IEEE 802.3U,
PLC Standard HomePlug AV
Operating System OS independent
Max. devices in a
network Group
Up to 63 slaves with 1 master, 64 total devices
IGMP Support for IPv4/IGMP v1,v2,v3 snooping
Support for IPv6 and MLD v1,v2 snooping
Max 16 source addresses and Group Members
Encryption 128-bit AES Link Encryption with key management
LEDs 1. Power (green), 2. Powerline
Activity (green), 3. Ethernet
Link/Activity (green)
1. Power (blue), 2. Powerline Activity
(blue), 3. AV/1.0 DET (blue),
Temperature 0~40 ℃ (Operating); -20~60 ℃ (Storage)
10~85% Non-Condensing (Operating)
Relative Humidity
5~90% Non-Condensing (Storage)
Power Source 100 ~ 240 VAC 50/60Hz
Power consumption Full load: (110 VAC) = 2.7W; (220
VAC) = 3.28W; (240 VAC) = 4W
Standby mode: (110 VAC) =
0.72W; (220 VAC) = 1.36W; (240
VAC) = 1.4W
Full load: (110 VAC) = 4.2W; (220 VAC) =
5.3W; (240 VAC) = 5.8W
Certification CE, CE-LVD, FCC Class B