How to set up your brinno gardenwatchcam – Brinno GWC User Manual

Page 3

1. Remove the GardenWatchCam from the

package.

2. Check to make sure that all the contents are

included.

3. Open up the GardenWatchCam by placing it

Lens side down on a flat surface, or Lens side
down in the palm of your hand, and remove
the battery door by pulling open the latch.

4. With the wheel in the middle of the camera

you can choose between one of seven time
interval settings. Simply rotate the wheel with
your finger left or right to choose the desired
setting.

1 minute

5 minutes

30 minutes

1 hour

4 hours

24 hours

Custom ( Factory setting = 5 seconds )

How to set up your Brinno GardenWatchCam

** To modify the 7th custom setting, insert the CD included with your GardenWatchCam

into your computer, and follow the instructions.

The custom setting can range anywhere from 5 seconds to 11 hours and 59 minutes and 59 seconds.

The factory default custom setting is set to 5 seconds.

(The specific steps to install the software onto your computer as well as your USB

Flash Drive are listed below on page 8-11).

Wheel position

The Custom Time Interval setting options are as follows:

Time interval between pictures

Macro Image

Standard Image

Power Button

Lens

Battery Cover

Mounting
Hole

USB
Flash Drive

AA Battery

Wheel

‧