Replacing the battery – Brother BCL-D60 User Manual
Page 36
Chapter 4
25
Clean the charger contacts as follows:
4
a
Unplug the cradle from the AC power
outlet.
b
Clean the charger contacts (1) for both
the cordless handset and the cradle with
a cotton swab.
Replacing the battery
4
If your battery performance is getting worse,
make sure that you have charged the battery
correctly. If the battery performance is still
poor, it is time to replace it.
WARNING
Use a genuine Brother rechargeable
battery (BCL-BT10). If not, it may cause
damage or personal injury.
CAUTION
DO NOT take off the white plastic that
covers the battery.
a
Press the area indicated (1) on the
battery cover (2) and slide it off the
cordless handset.
b
Remove the old battery and pull out the
connector.
c
Insert the connector (1) of the new
battery (2) in the direction shown below.
d
Place the battery in the correct position.
e
Slide the battery cover back on.
Note
• Be careful that you do not catch the
battery connector cord.
• After battery replacement, you should set
the date and time. (See Date and
Time on page 20.)
f
Charge the battery for 12 hours. (See
Charging the battery on page 24.)
1
1
2
1
2