Blaupunkt SEVILLA RD 126 - Manual (Page 20)

42
LOUDNESS Loudness - When listening
at a low level, the Loudness
function creates a more nat-
ural sound by boosting the
low frequency range.
LOUD 1 - Low boost
LOUD 6 - Max. boost
TA VOL To adjust the traffic an-
nouncement and warning
beep volume from between
0 to 63.
The message will then come
through at this volume, if the
standard volume is lower.
Should the standard volume
be higher than the TA VOL
level, then the traffic report
will be played slightly louder
than the standard volume.
DSC programming
DSC (Direct Software Control) allows you
to customise certain programmable, basic
settings to suit your personal needs and
preferences and then store them.
The basic settings for this audio equipment
were made at the factory.
In the following you can find an overview of
these settings, so that you can always reset
to these if desired.
If you wish to alter any of the programming,
•
press DSC.
Use the rocker switch and the button to
select and adjust the functions described in
the following. The display will show you the
adjusted condition.
/ Select function
<< >> Adjust/recall value
• press AF as many times until the de-
sired setting is displayed.
• Hold down the AF button until you hear
a beep.
SCAN operation
Use this function to scan all of the CD tracks.
To start the Scan function:
•
Press SC.
The titles will be scanned one after the oth-
er in ascending order.
To stop the Scan function:
•
Press SC.
The track currently being scanned is con-
tinued to be played.
SCAN will also be terminated by
•
pressing one of the buttons AUD,
GEO, DSC, SRC,
, << >> or / .
Sevilla RD126 gb® 03.06.2002, 12:19 Uhr 42