Blaupunkt SEVILLA RD 126 User Manual

Page 14

Scanning stored stations with
Preset Scan

You can have all of the stored stations
scanned briefly.

To start Preset Scan:
•

Press SC for approximately two sec-
onds.

All of the stored stations of the waveband
will be scanned one after the other. The
scanned frequency or the station name will
start flashing in the display. During the ac-
tual scanning process “SCAN” will be dis-
played.

To select a scanned station and switch
off Preset Scan:
•

Press SC briefly.

Scanning stations with
Radio-Scan

You can also scan all stations which can be
received.

To start the Scan function:
•

Press SC briefly.

The scanned frequency or the station name
will start flashing in the display. During the
actual scanning process “SCAN” will be dis-
played.

To select a scanned station and switch
off the Radio-Scan function:
•

Press SC briefly.

If no station is selected, the scan function
will be automatically switched off after the
frequency band has been run through com-
pletely. The unit will tune in the station lis-
tened to before starting the scan.

Changing the scan time

The scan time can be changed from be-
tween five to a maximum of 30 seconds.
Please refer to chapter “DSC programming
- SCANTIME”.

Selecting the seek tuning sensi-
tivity

You can alter the automatic seek tuning
sensitivity.
If “lo” is displayed, the radio will only pick up
strong, local stations (low sensitivity).
If “lo” does not light up, the radio will also
pick up weaker, distant stations (high sen-
sitivity).
The sensitivity level can be altered in both
modes (see also chapter “DSC program-
ming”).

Automatically storing the stron-
gest stations with Travelstore

You can automatically store the six most
powerful FM stations of your current recep-
tion area sorted according to their signal
strength. This function is particularly con-
venient on longer trips.
•

Press the FM

button for two seconds.

“T-STORE” will appear in the display.
The six strongest FM stations will be auto-
matically stored on the memory bank “T”
(Travelstore). When this process has been
completed, the radio will play the first sta-
tion.
If desired, stations can also be stored
manually on the Travelstore bank (see “Stor-
ing stations”).

Recalling stored stations

You can recall any stored station by pres-
sing the corresponding preset button.
•

Select the waveband by pressing FM

or M•L. On FM, also choose the corre-
sponding memory bank by pressing
the FM

button as many times until the

desired bank appears in the display.

•

Briefly press the corresponding preset
button.

Sevilla RD126 gb®

03.06.2002, 12:19 Uhr