Bonide Weed Beater Plus RTS - Manual (Page 3)

HOW TO USE
• Measure area to be sprayed. Calculate 'square feet' by multiplying length
times width. This 32 fl. oz. container will cover 6,600 square feet.
• Make sure sprayer nozzle is in "OFF" position then, connect sprayer to
garden hose.
• Turn water on at faucet. Extend hose to the farthest area of lawn to be
treated. To begin spraying, push lock tab down and turn knob control lever
to "ON" position. The product mixes automatically with the water. Walk at
a steady pace while spraying evenly and working back toward the faucet
to avoid walking over wet, treated grass.
• To stop spraying, turn knob control lever to the "OFF" position. Turn off
water at the faucet. To relieve pressure, turn knob control lever to the
"ON" position and point the sprayer away from any desirable plants before
disconnecting the spray nozzle from the garden hose.
Apply this product when weeds are small and actively growing.
Can be applied to the following turf grasses: Kentucky bluegrass, Ryegrass
(perennial and annual), Tall Fescue, mixtures of cool season grasses,
Bermudagrass* (common and hybrid), Zoysiagrass and Buffalograss.
*Do not apply to Bermudagrass lawns when daytime temperatures
exceed 85°F. Application to Bermudagrass may cause temporary
yellowing or discoloration but full recovery can be expected.
The maximum application rate to turf is 1.0 pound of 2,4-D acid equivalent
per acre per application per site. The maximum number of broadcast
applications per treatment site is 2 per year.