Bonide Repels-All RTS - Manual (Page 3)

TWIST & SHOOT™ READY-TO-SPRAY INSTRUCTIONS
1) Make sure control knob is in “OFF” position, then connect to garden hose.
2) Turn water on at faucet. When spraying low growing plants and small shrubs, twist
the control knob right, to the “FAN” position. When spraying taller trees, shrubs and
other plants, twist the control knob left to the “STREAM” position for extended reach
and more uniform coverage. The product mixes automatically with the water as you
spray.
3) To stop spraying, turn the control knob lever to the “OFF” position. Turn off water at
the faucet and disconnect sprayer from garden hose.
As a foliar application, spray leaves, stems and branches thoroughly from all angles,
until run-off occurs or plants look wet. Allow 6 hours of drying time before watering
plants or expected rainfall. Treat vulnerable plants at the beginning of their growth cycle
and repeat at 7 to 10 day intervals during periods of rapid growth. Apply monthly during
periods of moderate growth. Do not apply directly to vegetable crops intended for human
consumption. Apply to the area around desirable vegetables to form a repelling barrier.
To protect Bulbs and Seeds from birds, squirrels, chipmunks, moles, voles, pine and
meadow mice, treat bulbs before storage or planting. Remove old skin and soil, and
then spray thoroughly until wet. Allow to dry before storing or planting. Seeds can be
sprayed at time of planting.
HOW TO USE