Bonide Repels-All Conc. - Manual (Page 3)

Trigger Sprayer Bottles
To make one quart (32 fl. ozs.) of finished product to be applied with a Trigger Sprayer,
begin with an empty 1 Quart bottle, add 4 fluid ounces of SHOT GUN® REPELS-ALL®
Animal Repellent Concentrate, then add 28 fluid ounces of water, for a total of 32 fluid
ounces (1 Quart) of finished spray. Screw on Trigger Sprayer then SHAKE WELL BE-
FORE USING and frequently during use to keep product mixed well.
Pressure Tank Sprayers
(One Gallon Sprayer)
To make one gallon (128 fl. ozs.) of finished product to be applied with a Pressure Sprayer,
begin with an empty 1 Gallon sprayer tank, add 16 fluid ounces of SHOT GUN® REPELS-
ALL® Animal Repellent Concentrate, then add 112 fluid ounces of water, (filling to the 1
Gallon mark on the sprayer.) Screw on Tank Pump Assembly then SHAKE WELL BE-
FORE USING and frequently during use to keep product mixed well.
(Two Gallon Sprayer)
To make two gallons (256 fl. ozs.) of finished product to be applied with a Pressure
Sprayer, begin with an empty 2 Gallon sprayer tank, add 32 fluid ounces of SHOT GUN®
REPELS-ALL® Animal Repellent Concentrate, then add 224 fluid ounces of water, (filling
to the 2 Gallon mark on the sprayer.) Screw on Tank Pump Assembly then SHAKE WELL
BEFORE USING and frequently during use to keep product mixed well.
As a foliar application, spray leaves, stems and branches thoroughly from all angles,
until run-off occurs or plants look wet. Allow 6 hours of drying time before watering
plants or expected rainfall. Treat vulnerable plants at the beginning of their growth cycle
and repeat at 7 to 10 day intervals during periods of rapid growth. Apply monthly during
periods of moderate growth. Do not apply directly to vegetable crops intended for human
consumption. Apply to the area around desirable vegetables to form a repelling barrier.
HOW TO USE