Bonide Pruning Sealer Tree Wound Dressing - Manual

READ ENTIRE LABEL. USE STRICTLY IN ACCORDANCE
WITH LABEL CAUTIONS AND DIRECTIONS.
BONIDE Pruning Sealer is a fast, easy and effective
dressing designed to aid healing of pruning cuts, grafts
and wounds on trees and shrubs, including roses and fruit
trees. It provides a protective coating to prevent the entry of
moisture and the excessive flow of sap. It can also be used
for waterproofing various planting pots and tubs as well as
other items used in the garden. Always replace cap tightly to
prevent drying out. Spills can be cleaned up with turpentine
or mineral spirits.
CAUTION: KEEP AWAY FROM HEAT OR OPEN FLAME.
USE IN WELL VENTILATED AREAS. May be harmful
if swallowed. Avoid contact with eyes and skin. In case
of contact flush eyes with fresh water for at least fifteen
minutes; for skin, wash with white mineral oil, wipe off
excess and then wash with soap and water. Get medical
attention if irritation persists.
DIRECTIONS FOR USE
ROSES AND ORNAMENTAL SHRUBS, FRUIT AND SHADE
TREES: Cut away decayed or dead wood, back to sound wood.
Apply sealer to all cuts over ½ inch in diameter immediately after
pruning cuts are made or when grafting is complete. Use the built-in
applicator top to brush on a protective layer of material.
WOUNDS AND ABRASIONS: Trim wound area and treat. Use the
built-in applicator top to brush on a protective layer of material.
WATERPROOFING: To waterproof and seal planting tubs, pots,
etc. make two (2) applications allowing the first to dry completely
before making a second application.
NOTICE: Buyer assumes all risk for safety and use not in accordance with
directions.
xxxxxxxx
Bonide Products, Inc.
6301 Sutliff Road
Oriskany, NY 13424