Bonide Liquid Copper Conc. - Manual (Page 2)

DIRECTIONS FOR USE
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.
Read and follow all applicable directions and precautions on this label before using.
Do not allow adults, children or pets to enter the treated area until sprays have dried.
Do not apply this product in a way that will contact adults, children or pets, either directly
or through drift.
Shake well before use. Most conventional liquid pesticide plant sprayers can be used
to apply this product to plants. Reapply after rain, following the application interval in
the application notes.
To control powdery mildews, use a solution of 0.5 to 2.0 fluid ounces of this product in a
gallon of water. For best control, start spraying before the disease is visible or when mildew
is first visible on the plant. Spray all plant parts thoroughly (top and bottom of leaves), and
repeat every 7 to 10 days. When powdery mildew presence is expected on a plant, spray
the plants at the minimum application interval during the first 2 weeks after emergence.
To control downy mildews, leaf and fruit spots, blights, and rust, use a solution of
0.5 to 2.0 fluid ounces of this product in a gallon of water. Ensure that all surfaces of
the plant are thoroughly sprayed (top and bottom of leaves). For best control, begin
treatment 2 weeks before disease normally appears or when weather forecasts predict
a long period of wet weather. Alternatively, begin treatment when disease first appears,
and repeat as long as needed. See application notes for the specific crop application
interval. Use 2 fluid ounces per gallon of water, sprayed every 7-10 days, following
heavy rain or when the amount of disease is increasing rapidly. This higher rate
should be used for preventing late blight on potato and related plants. If possible, time
applications so that at least 12 hours of dry weather follows application.
To prevent fruit rots, use a solution of 0.5 to 2.0 fluid ounces of this product in a gallon of
water. Ensure that all surfaces of the plant are thoroughly sprayed (top and bottom of leaves).
Apply at the start of flowering and continue every 7 to 10 days until harvest. Fungicidal sprays
are especially warranted when weather forecasts predict a long period of wet weather.
APPLICATION DIRECTIONS