Bonide KleenUp 41% Conc. - Manual (Page 3)

Refer to the chart below to determine the amount of this product to use.
Use mixed spray within 2 weeks.
Using a coarse droplet spray, carefully spray unwanted foliage until wet.
SPOT TREATMENT
To prepare areas for planting of ornamentals, trees, shrubs, desert landscapes,
rock gardens, flower beds or similar plantings, apply this product as directed for
Spot Treatment or Brush Control. Treated areas can be replanted as soon as
1 day after treatment. For best results, remove dead foliage before replanting.
GARDEN PLOT PREPARATION
To kill existing weeds and grasses in lawns, apply when lawn is actively growing.
Best results will be obtained in the Spring or Fall, when daytime temperatures
are at least 60°F. Under dry conditions, prepare lawn by watering every other
day for a week before using this product. Do not mow for 7 days before or after
treatment. After 7 days, prepare the soil for planting by raking or rototilling the
lawn. Rake up and remove loosened thatch or debris. Mix in starter fertilizer and
other amendments and level soil, as needed. Apply seed according to package
directions, or install sod. Keep area moist until new lawn is well established.
LAWN RENOVATION
Treat unwanted brush when it is green and growing. If brush is more than 5 feet
tall, cut it back to the base and spray regrowth. Brush sprayed in the fall may
not be fully controlled until the following season. Hard-to-control brush (such as
blackberry, kudzu, or poison ivy) may require a second application in 30 days.
BRUSH CONTROL
If unwanted vines are growing up a pole, fences or mature tree trunk, cut vines to a height
of 3 to 4 feet and spray to thoroughly cover the remaining foliage. If vines are climbing a
shrub or immature (green) tree trunk, cut vines at the base and spray regrowth. Protect
desirable shrubs and tree trunks from spray drift with cardboard or plastic.
TO KILL VINES