Bonide INFUSE Concentrate - Manual (Page 5)

LAWNS
1. Apply after mowing or allow sprayed area to completely dry before mowing.
2. Measure the length and width of area to be treated before application.
Length x width = square feet. For example, an area 25 ft. long and 20 ft. wide is
500 sq. ft.
Amount of Product
5 fl. oz. in 1 gal. of water
per 250 sq. ft. of lawn
3 fl. oz. in 1 gal. of water
per 250 sq. ft. of lawn
5 fl. oz. in 1 gal. of water
per 250 sq. ft. of lawn
9 fl. oz. in 1 gal. of water
per 250 sq. ft. of lawn
5 fl. oz. in 1 gal. of water
per 250 sq. ft. of lawn
5 fl. oz. in 1 gal. of water
per 250 sq. ft. of lawn
9 fl. oz in 1 gal. of water
per 250 sq. ft. of lawn
3 fl oz. in 1 gal. of water
per 250 sq. ft. of lawn
Comments
If needed, repeat treatment every 10
days. First application should be in
May or June before disease is present.
Apply every 14 days.
If needed, repeat every 21 days
when conditions are favorable for
disease to occur.
Apply in the Fall and/or the early
spring.
If needed, repeat every 21 days
when conditions are favorable for
disease to occur.
Apply twice in the Fall prior to snow
cover waiting 14 days between
each application.
Apply when conditions are favorable
for disease development.
Apply in Fall after grass is dormant
or in early Spring before grass
starts to grow.
Disease
Brown Patch
Dollar Spot, Powdery
Mildew, Rust,
Anthracnose
Fusarium Patch
Necrotic Ring Spot
Red Thread, Pink
Patch, Dichondra Rust
on Dichondra Lawns
Snowmold (Gray
or Pink)
Spring Dead Spot
Stripe Smut
ESTABLISHED LAWNS