Bonide Household Insect Control RTU - Manual (Page 5)

Use this product as a crack and crevice treatment in closets and other storage areas
where these pests are found. This is an adjunct treatment and will not control moth
larvae already on clothes. Do not apply to clothing.
Remove linens and wash before reuse. Lightly spray mattresses, especially tufts, folds
and edges. Apply to the interior of the frame. Allow to dry before remaking bed.
BEDBUGS
Remove all exposed food and cooking utensils. Cover all food handling surfaces or
wash thoroughly after treatment and before use. Do not use on edible crops. Do not
water the treated area to the point of run-off. Do not make applications during rain.
All outdoor applications must be limited to spot or crack-and-crevice treatments only,
except for the following permitted uses:
(1) Treatment to soil or vegetation around structures;
(2) Applications to lawns, turf, and other vegetation;
(3) Applications to building foundations, up to a maximum height of 3 feet.
Other than applications to building foundations, all outdoor applications to impervious
surfaces such as sidewalks, driveways, patios, porches and structural surfaces (such as
windows, doors, and eaves) are limited to spot and crack-and-crevice applications only.
Point sprayer away from face. Hold sprayer on a slight downward angle, approximately
12 inches from surface to be sprayed. Spray with wind if breeze is blowing. Do not
contaminate fish ponds or apply directly to water.
OUTDOORS
For control of building infestation to ants, Asian ladybeetle, clover mites, crickets and
sowbugs (pillbugs). Spray foundation of building where insects are active and may find
entrance up to a height of 2 to 3 feet. Apply as a spot or crack-and-crevice spray to outside
surfaces of buildings where insects tend to congregate. Spray areas include (but are not
limited to) screens, window frames, eaves, porches, patios, garages and refuse dumps.
PESTS ON OUTSIDE SURFACES OF BUILDINGS
WEBBING CLOTHES MOTHS