Bonide Carpenter Ant Control Conc - Manual (Page 3)

Use a clean sprayer. Carefully measure and mix the amount of
concentrate and water as directed. Spray as directed. Thorough
coverage is important. Flush sprayer with clean water after each use.
Make applications when insects first appear. Repeat applications as
directed. See directions for complete insect list.
People and pets should not be allowed in treated areas until spray
has dried.
Use dilution rates as indicated.
1 fl. oz = 6 tsp. or 2 Tbsp.
8 fl. oz = ½ pt. or 1 cup
DIRECTIONS FOR USE Cont.
For Beetles (Furniture, Deathwatch, False Powderpost, Longhorned,
Powderpost), Carpenter Ants (and other wood-infesting ants),
Carpenter Bees and termites (including drywood termites): Treat
outside of buildings, porches, wooden decks, and patios, wooden
fences, window frames, doorways, foundations, eaves, garages,
garbage areas and other areas where you may find these pests.
Mix 10 fl. oz with 1 gal. of water to treat 100 sq. ft. Spray infested surfaces
thoroughly to a height of 3 feet, avoiding dripping and runoff. Apply evenly
on wood surfaces. To treat small areas, apply as a spot or crack-and-
crevice treatment by brushing or spraying the diluted spray. For large
areas, use a coarse, low pressure spray. Repeat treatment as needed
to maintain effectiveness. Do not spray into electrical outlets or utilities.
WOOD-INFESTING INSECTS (including termites)