Blizzard Lighting Q12+ The Puck - Manual (Page 11)

Page 11
The Puck™ Q12+ Manual Rev. A Copyright (c) 2012 Blizzard Lighting, LLC
To Show the Fixture Running Hours:
1.) Select
FhrS
from the control panel, then hit to confirm.
Menu Conventions
Addr
= “ADDR,” DMX Address Set/Adjust
ChNd
= “CHMD,” Channel Mode Adjust
3 /5/12 Ch
= “3 Ch,” 3/5/12-Channel DMX Mode
SLNd
= “SLMD,” Slave Mode Adjust
NASt
= “MAST,” Master, set the unit to Master Mode.
SLAv
= “SLAV” Slave, set the unit to Slave Mode.
StbY
= “STBY,” Standby, unit is in Slave with no Master Fixture.
SHNd
SouN
= “SOUN,” Sound Active Mode.
CoLo
= “COLO,” Color Preset Mode.
Co XX
= “CO 1 - CO31," Color Preset X.
AUto
= “AUTO,” Auto (Color Snap) Mode.
FAdE
= “FADE,” Color Fade Mode.
SP X
= “SP 1 - SP 8,” Fade Speed 1-8 (Fast <-> Slow)
StCo
= “STCO,” Color Strobe Mode.
Co XX
= “CO 1 - CO31,” Color Preset X.
NANu
= “MANU,” Manual Color / White Point Adjustment Mode.
REd
= “RED," Adjust Red Intensity from 0 to 255.
GrEE
= “GREE,” Adjust Green Intensity from 0 to 255.
bLuE
= “BLUE,” Adjust Blue Intensity from 0 to 255.
ANbE
= “AMBE,” Adjust Amber Intensity from 0 to 255.
UhIt
= “WHIT,” Adjust White Intensity from 0 to 255.
FhrS
= “FHRS,” Displays Fixture Running Hours
tESt
= “TEST," Test Mode.